about us

price quote

ELMEC sitemap

Products

PDF Catalog Download

	Variable
	Differential
	Fixed
	CDA
	Features Common Specs Package Dim. / Pin Config Specification of Tape and Reel Suggested Land Pattern Reflow Soldering Conditions Product Specs Typical Applications Output Waveforms RoHS Compliance Status
	CDM
	FDC/FDD
	FDG
	Tap
	Programmable
	High-Frequency Probe Unit
	Socket
	Skew
	Differential Signal Balancer/Common-mode Noise Absorber
	Common Mode Filter <Common Mode Eliminator>
	What's New
	Care and Handling of LTCC Products

CDA-Type
Surface-Mount Fixed High-Speed Delay Lines

The CDA family of high-speed fixed Delay Line products is available in a surface-mount package. They are also available for a variety of logic types and in either standard or custom specifications.

Features

Miniaturized high-speed fixed Delay Lines that combine ELMEC's high-density Delay Line elements in a surface-mount package.
Suitable for use with a variety of logic elements including the ECLinPS, ECL 100KH, 10K series as well as TTL FAST, CMOS FACT and analog circuits.
The also can be ordered in units of 500 pieces in "Tape & Reel" packaging.

Common Specifications

Waveform Distortion:	Overshoot/preshoot under ±20%
Temperature Coefficent:	0-150ppm/°C
Insulation Resistance:	DC50V, over 100MW
Durable Voltage:	DC50V, 1 minute
Operating Temperature Range:	-40°C to +85°C
Storage Temperature Range:	-40°C to +120°C

Package Dimensions & Pin Configuration

Unit:mm(inch)

CDA and CDAD type Tape and Reel specifications

Packaging of components can be in Tape and Reel to protect the pins from bending and for convenience of shipping and storage. The package is embossed with cover tape and contains 500pcs per reel, as shown below. The reel is marked with supplier name, part number, quantities, and lot number.

Guide hole

No 1 pin

Direction of Feed

Dimensions of Tape

Unit:mm(inch)

Dimensions of Reel

Unit:mm(inch)

Suggested Land Pattern

Reflow Soldering Conditions

ELMEC does not guarantee MSL Standards Classification. Please bake all components prior to reflow.
Baking Conditions: 120°C, 24 hours; or 80°C, 100 hours
However, because baking of T&R parts is not possible, transferring to trays is recommended prior to baking.

Non-RoHS-compliant components

Maximum Reflow Cycles:1

RoHS-compliant components

Maximum Reflow Cycles: 2

Product Specifications 50W
Impedance±10%

Part Number	Delay Time	RiseTime (20%-80% Max)	-3dB Passband Minimum	DC Resistance	Simulation Model and Data
Part Number	Delay Time	RiseTime (20%-80% Max)	-3dB Passband Minimum	DC Resistance	Simulation Model and Data
*CDA0005	50ps±50ps	100ps	3.0GHz	0.5ΩMax
*CDA0105	100ps±50ps	150ps	2.0GHz	1.0ΩMax	S
*CDA0205	200ps±50ps				E,T
*CDA0305	300ps±50ps
*CDA0405	400ps±50ps
*CDA0505	500ps±50ps				S
*CDA0605	600ps±50ps	200ps	1.5GHz	1.5ΩMax	E,S,T
*CDA0705	700ps±50ps
*CDA0805	800ps±50ps				E,S,T
*CDA0905	900ps±50ps				S
*CDA1005	1.0ns±50ps				E,S,T
*CDA1105	1.1ns±50ps	250ps	1.0GHz	2.0ΩMax	E,S,T
*CDA1205	1.2ns±50ps				E,S,T
*CDA1305	1.3ns±50ps				E,S,T
*CDA1405	1.4ns±50ps				E,S,T
*CDA1505	1.5ns±50ps				E,S,T
*CDA1605	1.6ns±50ps	300ps	800MHz	2.5ΩMax	E,T
*CDA1705	1.7ns±50ps				E,T
*CDA1805	1.8ns±50ps				E,T
*CDA1905	1.9ns±50ps				E,S,T
*CDA2005A	2.0ns±50ps				E,S,T
CDA2005	2.0ns±0.2ns	600ps	600MHz	1.0ΩMax	E,S,T
*CDA2105	2.1ns±50ps	350ps	700MHz	3.0ΩMax	E,T
*CDA2205	2.2ns±50ps				E,T
*CDA2305	2.3ns±50ps				E,T
*CDA2405	2.4ns±50ps				E,T
*CDA2505A	2.5ns±50ps				E,T
CDA2505	2.5ns±0.2ns	700ps	500MHz	1.0ΩMax	E,S,T
*CDA2605	2.6ns±50ps	400ps	600MHz	3.5ΩMax	E,T
*CDA2705	2.7ns±50ps				E,T
*CDA2805	2.8ns±50ps				E,T
*CDA2905	2.9ns±50ps				E,T
*CDA3005A	3.0ns+100ps / -50ps				E,T
CDA3005	3.0ns±0.2ns	700ps	500MHz	1.0ΩMax	E,S,T
*CDA3505A	3.5ns±100ps	450ps	550MHz	4.0ΩMax	E,T
CDA3505	3.5ns±0.25ns	700ps	500MHz	1.0ΩMax	E,S,T
CDA4005	4.0ns±0.3ns	700ps	500MHz		E,S,T
CDA4505	4.5ns±0.3ns	725ps	440MHz		E,S,T
CDA5005	5.0ns±0.3ns	750ps	400MHz		E,S,T
CDA5505	5.5ns±0.3ns	825ps	360MHz	2.0ΩMax	E,S,T
CDA6005	6.0ns±0.3ns	900ps	330MHz		E,S,T
CDA6505	6.5ns±0.4ns	975ps	300MHz		E,S,T
CDA7005	7.0ns±0.4ns	1.1ns	285MHz		E,S,T
CDA7505	7.5ns±0.4ns	1.2ns	250MHz		E,S,T
CDA8005	8.0ns±0.4ns	1.2ns	250MHz		E,S,T
CDA8505	8.5ns±0.5ns	1.3ns	235MHz		E,S,T
CDA9005	9.0ns±0.5ns	1.4ns	220MHz		E,S,T
CDA9505	9.5ns±0.5ns	1.5ns	200MHz		E,S,T
CDA10005	10.0ns±0.5ns	1.5ns	200MHz		E,S,T
CDA10505	10.5ns±0.6ns	1.6ns	190MHz	3.0ΩMax
CDA11005	11.0ns±0.6ns	1.7ns	180MHz		E,S,T
CDA11505	11.5ns±0.6ns	1.8ns	165MHz		E,S,T
CDA12005	12.0ns±0.6ns	1.8ns	165MHz		E,S,T
CDA12505	12.5ns±0.7ns	1.9ns	160MHz		E,S,T
CDA13005	13.0ns±0.7ns	2.0ns	150MHz		E,S,T
CDA13505	13.5ns±0.7ns	2.1ns	140MHz		E,S,T
CDA14005	14.0ns±0.7ns	2.1ns	140MHz		E,S,T
CDA14505	14.5ns±0.8ns	2.2ns	135MHz
CDA15005	15.0ns±0.8ns	2.3ns	130MHz		E,S,T
CDA16005	16.0ns±0.8ns	2.4ns	125MHz	5.0ΩMax	E,S,T
CDA17005	17.0ns±0.9ns	2.6ns	115MHz		E,S,T
CDA18005	18.0ns±0.9ns	2.8ns	110MHz		E,S,T
CDA19005	19.0ns±1.0ns	3.0ns	105MHz
CDA20005	20.0ns±1.0ns	3.2ns	100MHz		E,T
CDA22005	22.0ns±1.1ns	3.5ns	90MHz	6.0ΩMax
CDA25005	25.0ns±1.3ns	4.0ns	80MHz		E,S,T
CDA27005	27.0ns±1.4ns	4.3ns	70MHz
CDA30005	30.0ns±1.5ns	4.8ns	60MHz		E,S,T
Note: Product numbers with an asterisk (*) are distributed constant type delay lines. E - Uses Excel macro to indicate S-parameter, Group Delay characteristics, Pulse Response Wave. S - SPICE Model T - Touchstone format (S2P file)

For additional data, please inquire by email to. sales@elmectech.com

Product Specifications 100W
Impedance±10%

Part Number	Delay Time	RiseTime (20%-80% Max)	-3dB Passband Minimum	DC Resistance	Simulation Model and Data
Part Number	Delay Time	RiseTime (20%-80% Max)	-3dB Passband Minimum	DC Resistance	Simulation Model and Data
*CDA0010	50 ps±25ps	200ps	1GHz	0.5ΩMax
*CDA0510	500ps±100ps	200ps	1GHz	1.0ΩMax
CDA1010	1.0ns±100ps	300ps	900MHz		E,T
CDA1510	1.5ns±0.15ns	550ps	700MHz		E,T
CDA2010	2.0ns±0.2ns	600ps	600MHz		E,S,T
CDA2510	2.5ns±0.2ns	700ps	500MHz	2.0ΩMax	E,S,T
CDA3010	3.0ns±0.2ns				E,S,T
CDA3510	3.5ns±0.25ns				E,S,T
CDA4010	4.0ns±0.3ns	725ps	450MHz		E,T
CDA4510	4.5ns±0.3ns	750ps	400MHz		E,S,T
CDA5010	5.0ns±0.3ns	800ps	360MHz		E,S,T
CDA5510	5.5ns±0.3ns	880ps	325MHz	3.0ΩMax	E,S,T
CDA6010	6.0ns±0.3ns	960ps	300MHz		E,S,T
CDA6510	6.5ns±0.4ns	1.0ns	275MHz		E,T
CDA7010	7.0ns±0.4ns	1.1ns	255MHz		E,S,T
CDA7510	7.5ns±0.4ns	1.2ns	240MHz
CDA8010	8.0ns±0.4ns	1.3ns	225MHz	5.0ΩMax	E,T
CDA8510	8.5ns±0.5ns	1.4ns	210MHz
CDA9010	9.0ns±0.5ns	1.5ns	190MHz		E,S,T
CDA9510	9.5ns±0.5ns	1.5ns	190MHz		E,S,T
CDA10010	10.0ns±0.5ns	1.6ns	180MHz		E,S,T
CDA10510	10.5ns±0.6ns	1.7ns	170MHz	7.0ΩMax
CDA11010	11.0ns±0.6ns	1.8ns	160MHz		E,S,T
CDA11510	11.5ns±0.6ns	1.9ns	150MHz
CDA12010	12.0ns±0.6ns	1.9ns	150MHz		E,S,T
CDA12510	12.5ns±0.7ns	2.0ns	140MHz		E,S,T
CDA13010	13.0ns±0.7ns	2.1ns	135MHz
CDA13510	13.5ns±0.7ns	2.2ns	130MHz		E,S,T
CDA14010	14.0ns±0.7ns	2.3ns	125MHz		E,S,T
CDA14510	14.5ns±0.8ns	2.3ns	125MHz	9.0ΩMax	E,S,T
CDA15010	15.0ns±0.8ns	2.4ns	120MHz	9.0ΩMax	E,S,T
CDA16010	16.0ns±0.8ns	2.6ns	110Mz	11.0ΩMax
CDA17010	17.0ns±0.9ns	2.7ns	105Mz		E,S,T
CDA18010	18.0ns±0.9ns	2.9ns	100MHz		E,S,T
CDA19010	19.0ns±1.0ns	3.1ns	95MHz		E,S,T
CDA20010	20.0ns±1.0ns	3.2ns	90MHz		E,S,T
Note: Product numbers with an asterisk (*) are distributed constant type delay lines. E - Uses Excel macro to indicate S-parameter, Group Delay characteristics, Pulse Response Wave. S - SPICE Model T - Touchstone format (S2P file)

For additional data, please inquire by email to. sales@elmectech.com

Typical Applications

(1) Analog circuit

r: Signal Source Impedance
Rin: Input Adjustment Resistance
Zo: Characteristic Impedance
r+Rin=Zo=R

(2) ECL (-2V termination line used)

Connect to one of the V_CC, V_EE or -2V lines

(3) ECL (-2V termination line not used)(PECL)

Connect to either V_CC or V_EE lines

(4) LVPECL

Connect to either 3.3V or GND

(5) LVPECL Differential

Connect to either 3.3V or GND

(6) TTL (FAST), CMOS (FACT)

Ro should be adjusted to a value near Zo.

Output Waveforms
CDA1005
Output waveform (Step function)	Amplitude / Frequency

Output waveform (1GHz Clock)	Group Delay

CDA1505
Output waveform (Step function)	Amplitude / Frequency

Output waveform (667MHz Clock)	Group Delay

CDA2005A
Output waveform (Step function)	Amplitude / Frequency

Output waveform (500MHz Clock)	Group Delay

CDA2505A
Output waveform (Step function)	Amplitude / Frequency

Output waveform (400MHz Clock)	Group Delay

CDA3005A
Output waveform (Step function)	Amplitude / Frequency

Output waveform (333MHz Clock)	Group Delay

CDA5005
Output waveform (Step function)	Amplitude / Frequency

Output waveform (200MHz Clock)	Group Delay

CDA10005
Output waveform (Step function)	Amplitude / Frequency

Output waveform (100MHz Clock)	Group Delay

RoHS Compliance Status 1. Compliance Status RoHS-compliant components are available. However, if RoHS-compliant components are not specified at the time of order, non-compliant stock items may be supplied until depleted. Also, as high-temperature solder containing over 85% lead is used internally, which is outside the RoHS specifications, we qualify these as RoHS-compliant components. Differentiating Compliant and Non-compliant Components Compliant and Non-compliant Components will be differentiated by Lot Numbers. Non-compliant Components:2-digit year/month code Compliant Components DC Type:S+2-digit year/month code (3-digit code) Compliant Components LC Type:R+2-digit year/month code (3-digit code) 3. Terminal Plating Non-compliant Components: Base: 99% Ni/1% B, 1.2~1.6µm External: 60% Sn/40% Pb, over 5µm Compliant Components DC Type: Base: 100% Ni, 0.2~0.5µm External: 100% Sn, 5~10µm Compliant Components LC Type: Base: 99% Ni/1% B,1.2~1.6µm External: 100% Sn, over 5µm

CDA-TypeSurface-Mount Fixed High-Speed Delay Lines

Features

Guide hole

No 1 pin

Direction of Feed

Dimensions of Tape

Unit:mm(inch)

Dimensions of Reel

Unit:mm(inch)

Non-RoHS-compliant components

RoHS-compliant components

Product Specifications 100W Impedance±10%

(1) Analog circuit

(2) ECL (-2V termination line used)

(3) ECL (-2V termination line not used)(PECL)

(4) LVPECL

(5) LVPECL Differential

(6) TTL (FAST), CMOS (FACT)

CDA1005

Output waveform (Step function)

Amplitude / Frequency

Output waveform (1GHz Clock)

Group Delay

CDA1505

Output waveform (Step function)

Amplitude / Frequency

Output waveform (667MHz Clock)

Group Delay

CDA2005A

Output waveform (Step function)

Amplitude / Frequency

Output waveform (500MHz Clock)

Group Delay

CDA2505A

Output waveform (Step function)

Amplitude / Frequency

Output waveform (400MHz Clock)

Group Delay

CDA3005A

Output waveform (Step function)

Amplitude / Frequency

Output waveform (333MHz Clock)

Group Delay

CDA5005

Output waveform (Step function)

Amplitude / Frequency

Output waveform (200MHz Clock)

Group Delay

CDA10005

Output waveform (Step function)

Amplitude / Frequency

Output waveform (100MHz Clock)

Group Delay

RoHS Compliance Status

1. Compliance Status

Differentiating Compliant and Non-compliant Components

3. Terminal Plating

CDA-Type
Surface-Mount Fixed High-Speed Delay Lines

Product Specifications 100W
Impedance±10%

Output waveform
(Step function)

Output waveform
(1GHz Clock)

Output waveform
(Step function)

Output waveform
(667MHz Clock)

Output waveform
(Step function)

Output waveform
(500MHz Clock)

Output waveform
(Step function)

Output waveform
(400MHz Clock)

Output waveform
(Step function)

Output waveform
(333MHz Clock)

Output waveform
(Step function)

Output waveform
(200MHz Clock)

Output waveform
(Step function)

Output waveform
(100MHz Clock)