|
CDAD Surface-Mount High-Speed Differential Delay Lines
The CDAD family of high-speed differential delay lines are available in surface-mount (SMD) packaging in either standard or custom specification.
Features
- Miniaturized high-speed differential delay lines that combine ELMEC's high-density delay line elements in the same surface-mount package as the CDA family of single fixed SMD delay line.
- Suitable for use with a variety of logic elements including the ECLinPS, ECL 100KH, 10K series as well as TTL FAST, CMOS FACT and analog circuits.
- The CDAD family of differential delay lines are cased in the exact same package and footprint so that it can be inserted onto the CDA family land pattern.
|
Common Specifications
| Impedance: |
single-ended: 50 W ±10%
differential: 100 W ±10% |
| Waveform Distortion: |
Overshoot/preshoot under 20% |
| Temperature Coefficient: |
0~150ppm/°C |
| Insulation Resistance: |
DC50V, over 100M W |
| Durable Voltage: |
DC50V, 1 minute |
| Operating Temperature Range: |
-40°C to +85°C |
| Storage Temperature Range: |
-40°C to +120°C |
CDAD Product Specifications
| Part Number |
Delay Time |
Delay
Difference |
Rise Time
(20-80% Max) |
-3 dB Passband (Minimum) |
DC Resistance |
| CDAD0105 |
100ps ±50ps |
15ps Max |
150ps Max |
2GHz Min |
1.5W Max |
| CDAD0205 |
200ps ±50ps |
| CDAD0305 |
300ps ±50ps |
| CDAD0405 |
400ps ±50ps |
| CDAD0505 |
500ps ±50ps |
| CDAD0605 |
600ps ±50ps |
200ps Max |
1.5GHz Min |
| CDAD0705 |
700ps ±50ps |
| CDAD0805 |
800ps ±50ps |
| CDAD0905 |
900ps ±50ps |
| CDAD1005 |
1.0ns ±50ps |
| CDAD1105 |
1.1ns ±50ps |
20ps Max |
250ps Max |
1.1GHz Min |
2.0W Max |
| CDAD1205 |
1.2ns ±50ps |
| CDAD1305 |
1.3ns ±50ps |
| CDAD1405 |
1.4ns ±50ps |
2.5W Max |
| CDAD1505 |
1.5ns ±50ps |
| CDAD1605 |
1.6ns ±50ps |
300ps Max |
800MHz Min |
| CDAD1705 |
1.7ns ±50ps |
3.0W Max |
| CDAD1805 |
1.8ns ±50ps |
| CDAD1905 |
1.9ns ±50ps |
| CDAD2005 |
2.0ns ±50ps |
Package Dimensions & Pin Configuration
Packaging of components can be in Tape and Reel to protect the pins from bending and for convenience of shipping and storage. The package is embossed with cover tape and contains 500pcs per reel, as shown below.
The reel is marked with supplier name, part number, quantities, and lot number.
Guide hole
No 1 pin
|
Direction of Feed
|
|
ELMEC does not guarantee MSL Standards Classification. Please bake all components prior to reflow.
Baking Conditions: 120°C, 24 hours; or 80°C, 100 hours
However, because baking of T&R parts is not possible, transferring to trays is recommended prior to baking.
Non-RoHS-compliant components
Maximum Reflow Cycles:1
Printable Version - High Resolution PDF
|
RoHS-compliant components
Maximum Reflow Cycles: 2
|
| Printable Version - High Resolution PDF |
|
| |
